Karlev
[??]lsm[??][??#??]-02 Rm
[??]lsm[??][?? ??]02 Rm > http://bit.ly/1Ut7HYo
0b75921d8f
For example: # fsck-p/dev/rvol/ temp-volume-name Copy the temporary volume to tape, or to some other appropriate backup media. You cannot use the volassist shrinkto and volassist shrinkby commands with striped volumes. #02-27 (Tel: x4709) Microscope: Leica DMI 6000 Lasers: 405nm, 470-670nm(WLL), 457/476/496/514nm (Argon Laser), 592nm (STED Laser) Spinning disk (Yokogawa), with incubator Location: Rm. To put a plex labeled vol01-02 in the STALE state, use the following command: # volmendonvol01-02 To make other state changes in a plex or a volume, refer to the subsequent sections on volume recovery options. # volplexatt volumename plexname You can also use the volassist utility to mirror existing volumes. To change the length of a volume using volume set, use the following command: # volumesetlen= value . You can list information related to volumes under LSM control, including the name of the volume, its usage type, state, length, user and group IDs, and mode. The volrestore command warns you to check the state of each disk associated with a volume before using volmend to set plex states; to carefully find out which disks in the LSM configuration could have had failures since saving the LSM configuration; and to use volmend to mark plexes on those disks to be "STALE." In addition, any plex that was detached or disabled at any point during or after the LSM configuration was saved should be marked "STALE" using volmend.
To take plex vol01-02 off line, use the following command: # volmendoffvol01-02 For ENABLED volumes, save a step by using volplex att without first invoking volmend on. # volassistmake volumename length diskname [.] . To preserve data on a volume, use either volume init active or volume init clean, as appropriate. # voleditset field = value . These attributes are changed whenever the use of the volume or users' needs change. The following sections describe how to unencapsulate LSM volumes and return to using disk partitions or AdvFS domains. To remove a volume, all references to the volume must be closed (that is, the file system in the volume must be unmounted, and the volume stopped using the volume stop command). 7.3.3Extending a Volume . The select policy chooses a default policy based on plex association to the volume. 1 M + 1 B LS-11S LSM-11S .
x201 prince of persia java game download
18 year indian girl rape video in mp4
telecharger patch pes 2013 pc raouf khlif
mac os 10.7.5 virtual box torrent
18_wheels_of_steel_american_long_haul_authorization_code-adds
by Karlev on 2016-06-06 05:50:59
Comments
No comments yet.